1022 is the lower oven's open bake element relay on a Wolf M Series double oven.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 1022.
Plain language
What this code means
Wolf reports an open relay on the lower bake element.
On an M Series double oven, 1022 belongs to the bottom cavity. Wolf describes it as an open relay on the lower bake element. The article lists “oven not heating” as a topic, the usual way the fault gets noticed.
At a glance
Code
1022
What it means
Wolf reports an open relay on the lower bake element.
What you can check
Switch the oven's breaker off, leave it half a minute, switch it back on and run the oven to see whether the code stays gone. Note when it first appeared.
When to call a technician
If 1022 persists, book a service appointment. Mention whether it showed at start-up, in preheat or mid-cycle, since that helps whoever works on the lower bake circuit.
Plain reading
Bake element: the heating part at the oven bottom.
Relay: the switch that lets power reach it.
1022: the control board reporting that switch as open.
Reason for the open state: not given by Wolf, and nothing else is claimed here.
What Wolf suggests
Switch the oven’s breaker off, leave it half a minute, switch it back on, then run the oven to see if the code stays gone. The article states that help for customers ends there and that an appointment with Wolf service follows.
Upper or lower?
The lower one. The oven above may heat as usual meanwhile; using it is up to you. A code on that oven as well sends you to the matching entry.
Notes worth keeping
Record when the code appeared: at start-up, in preheat or in the middle of a cycle. Wolf does not request it, though anyone working on a lower bake circuit will find it useful.
Wolf oven repair in Miami, New York, Houston, Los Angeles and San Diego
For the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 886-0581 when 1022 persists. Have the code and the lower oven noted, plus the time of onset (start-up, preheat or mid-cycle) and the model number on the data label. The Wolf oven service page is also available.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.