Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Wall Oven Error Code 1021: Upper Bake Element Relay Open

Error code 1021
Appliance Wall Oven
Quick answer

Wolf 1021 reports an open relay on the upper bake element, with a breaker reset to try first.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 1021.

Plain language

What this code means

Wolf reports the relay for the upper bake element as open.

If an M Series Wolf shows 1021 and the top cavity stays cold, Wolf’s answer matches. The wording is that the relay serving the upper bake element is open, and “oven not heating” appears among the topics listed with it.

At a glance

Code 1021
What it means Wolf reports the relay for the upper bake element as open.
What you can check Cut the oven's feed at its breaker, wait half a minute, switch it back on and try the oven. Keep the control area closed.
When to call a technician If 1021 still shows, or the top cavity stays cold, arrange a service visit. Bake circuits carry high voltage, so leave the repair to a technician.

Decoding it

A relay is a switch operated electrically. The oven control closes it to send power on to the upper bake element. Open means power is not getting through in the way the control expects. No reason is given for that, and no part is named for replacement.

The only step

  1. Cut the oven’s feed at its breaker.
  2. Wait half a minute and switch it back on.
  3. Try the oven.

With 1021 still showing, Wolf’s entry says nothing further is available for owners and refers them to Wolf service.

Keep clear of the circuit

Bake circuits carry high voltage. The oven stays in its cabinet and the control area stays shut. Each extra restart tells you nothing the first did not.

Quick answers

Will it still heat?
Unknown from Wolf. The heating topic makes trouble plausible, but only a test settles it.

Reset a second time?
Wolf mentions a single reset. A lasting 1021 does not bring a repeat into the published guidance.

Compare codes

  • 1022 is the lower cavity bake relay
  • 1231 reports the upper bake element DLB as open
  • 0021 is a bake relay shorted, the opposite state

Wolf oven repair in Miami, New York, Houston, Los Angeles and San Diego

Service reaches the Miami, New York, Houston, Los Angeles and San Diego metro areas through (844) 886-0581. Give the code, say the oven is not heating, and read the model number from the data label. The Wolf oven service page may be useful too.

Source: Wolf M Series wall oven fault code answer pages

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair