Error 09 reports a shorted meat probe on a legacy Wolf dual fuel range; check the probe seating first.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 09.
Plain language
What this code means
The control detects the meat probe as shorted.
What Err 09 says
The display message tells you the meat probe is detected as shorted on a legacy Wolf dual fuel range. Wolf’s first instruction concerns the probe, not the oven.
At a glance
Code
09
What it means
The control detects the meat probe as shorted.
What you can check
Check that the meat probe is fully seated in its receptacle and push it in squarely if needed. Then switch the breaker off for 30 seconds, on again, and retest.
When to call a technician
If Err 09 remains after reseating the probe and the reset, a service visit is required. Grip the plug rather than the cable when you pull the probe out.
Owner checklist
Check that the probe is fully in the receptacle and insert it if needed.
Look at Wolf’s answer on legacy dual fuel range oven temperature probe use for guidance.
Switch the home circuit breaker off for 30 seconds, then on.
Retest the oven.
Why a loose plug causes it
A probe that is only partly plugged in, or one with a damaged tip contact, can look like a short to the control. Pulling it out and pushing it back in squarely is free to try.
When the code remains
Wolf says service is required after these steps. For the related PROBE SHORTED message on the same range, its fix is a replacement temperature probe obtained through Wolf parts distributors.
Other labels for a probe short
On this range family the probe-short condition appears as PROBE SHORTED or as 3031/3032, depending on whether the control prints words or numbers.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.