Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Induction Range U400 Error Code

Error code U400
Appliance Induction Range
Quick answer

U400 is Wolf over voltage code for induction ranges. Reset once, then call a professional.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: U400.

Plain language

What this code means

Wolf lists U400 as over voltage on induction ranges.

The listed cause

Only over voltage is given for U400 on the legacy induction range page, and Wolf prints it identically for its CE, CI and integrated module products. Whether the extra voltage comes from the house supply or from inside the range goes unmentioned, and nothing else about the code is added.

At a glance

Code U400
What it means The range reports an over voltage condition.
What you can check Turn the breaker off to the unit, wait 30 seconds, turn it on and retest. Do not open the junction box, test terminals with a meter, or trip the breaker over and over.
When to call a technician If U400 stays after one reset, call a technician. An electrician may be needed if the building supply is the cause. Mention whether other household appliances act oddly.

The one safe step

Breaker off to the unit, wait 30 seconds, breaker on, retest. When the range then runs without U400, the matter is closed. This power cycle is the only advice Wolf gives.

Do not try

  • Opening the junction box.
  • Testing terminals with a meter, unless qualified.
  • Tripping the breaker over and over; a supply that is truly too high makes that unsafe.

Voltage trouble is the classic job for professionals, and repeated attempts are not a safe habit.

Who finds the cause

Wolf’s last instruction is to contact service. An electrician corrects the problem if the building’s supply is to blame, and until then the range will continue to show U400.

Short answers

Do surges explain U400?
Wolf names no source, only over voltage. An electrician or technician would have to trace where it comes from.

Can I reset the breaker safely?
Yes; Wolf lists it, provided no wiring is touched.

Related

  • E6, the supply error.
  • 20, a wrong connection with input over 300 volts.
  • 3C20, the wall oven’s high input voltage message.

Service for Wolf over voltage codes

Wolf induction range service covering the Miami, New York, Houston, Los Angeles and San Diego metro areas is reached at (844) 886-0581. Provide the model and note whether other household appliances act oddly.

Source: Wolf answers, Legacy Induction Ranges (IR) Series Error Code U400

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair