Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Induction Range E6 Error Code

Error code E6 / E06
Appliance Induction Range
Quick answer

E6 or E06 means an electrical supply error on Wolf induction ranges.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E6 / E06.

Plain language

What this code means

Wolf lists an electrical supply error for E6 on induction ranges.

E6 at a glance

The listing says electrical supply error, and the code can be printed E6 or E06. If it shows once and the range behaves after a reset, Wolf’s induction cooktop page says nothing needs to be done.

At a glance

Code E6 / E06
What it means The range reports an electrical supply error.
What you can check Make sure the pan is flat, smooth and magnetic enough to grip a magnet strongly. Then turn the range breaker off for 30 seconds, back on, and retest.
When to call a technician If E6 persists after the reset, the range needs a technician. Checking supply wiring on a high-current circuit is a job for an electrician or technician, not for you.

About the pan

Wolf’s CI induction cooktops use the same E6 wording and add a note about cookware that holds for any induction surface: flat, smooth, and enough iron to create a strong magnetic pull. That page counts a loud pop while cooking among situations where E6 appears. The legacy induction range page has no such note, so consider it a useful check and not a confirmed cause on a range.

What to do, in order

  1. Confirm the pan is flat and smooth with enough iron for a strong magnetic pull.
  2. At the breaker panel, turn the range off for 30 seconds, then on again.
  3. Test the surface again with a pan of that kind.

If it persists, Wolf states service is necessary to diagnose and repair the range.

Wiring is not an owner task

A range runs from a high-current circuit, so checking supply wiring is for an electrician or a technician. For an owner, the breaker reset is the only safe step on the supply side.

See also

  • U400: an over voltage message
  • 20: wrong connection, input over 300 volts
  • E7: unspecified error that tends to accompany another

Service for Wolf E6 faults

Technicians covering the Miami, New York, Houston, Los Angeles and San Diego metro areas take Wolf induction range calls at (844) 886-0581. Give the model and say whether the pan was magnetic.

Source: Wolf answers, Legacy Induction Ranges (IR) Series Error Code E6; CI Induction Cooktop Error Code E6

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair