Error 08 is a stored-memory checksum failure found at start-up on a legacy Wolf dual fuel range.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 08.
Plain language
What this code means
The EEPROM checksum test performed at power-up failed.
The moment it appears
The clue in Wolf’s article is “checked at power-up”. The control of a legacy dual fuel range checks its stored settings whenever it gets power, and error 08 says the EEPROM checksum is incorrect.
At a glance
Code
08
What it means
The EEPROM checksum test performed at power-up failed.
What you can check
Turn off the circuit breaker, wait about 30 seconds and switch it back on so the control repeats its power-up test. A fresh power-up shows whether the fault was a passing one.
When to call a technician
If the failure appears at every start, a one-time glitch is unlikely and the range needs a service visit, since there is no further owner step.
In plain language
An EEPROM is a memory chip that keeps settings through a power loss. The checksum is a figure derived from the stored data. If the two stop matching, the control has no reason to trust what it holds. Wolf gives no cause for the mismatch.
What to try
Turn off the circuit breaker, wait about 30 seconds, and turn it on again so the control repeats its power-up test. A new power-up is the only way to learn if the problem was a passing one.
What a return means
If the failure shows at every start, a one-time glitch becomes unlikely. Wolf then says there is no further advice, and the range must be repaired by its service channel.
Do not confuse it with CHECKSUM
Code
Cause given by Wolf
Owner steps
08
EEPROM checksum incorrect, checked at power-up
Breaker reset
CHECKSUM
Self-check at power-up and when the oven off key is pressed
Wolf legacy range service for the metro areas we cover
For Miami, New York, Houston, Los Angeles and San Diego, our line for Wolf dual fuel range repair is (844) 886-0581. Say that Err 08 comes back after every restart.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.