Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Convection Steam Oven Error Code E123: F5 / F20 Message

Error code E123
Appliance Convection Steam Oven
Quick answer

Where neighbouring codes show F5, E123 may show F5 or F20. The reset step is unchanged.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E123.

Plain language

What this code means

E123 on the Wolf convection steam oven is listed with an F5 or F20 message; Wolf gives a breaker reset and refers further trouble to service.

A Wolf touch-control convection steam oven that displays E123 is listed by Wolf with the message F5 or F20. Wolf does not describe what produces either message, and the entry carries no cause for the code.

At a glance

Code E123
What it means The oven shows E123 with an F5 or F20 message and no stated cause.
What you can check Cut power to the oven at the home circuit breaker, keep it off for 30 seconds, restore power and retest. If F20 appears on your oven, make a note of it.
When to call a technician If the fault remains after the reset, arrange a service visit. No cause is given for this code and no further owner check exists.

Where E123 stands out

Most nearby codes are printed with F5 alone. E123 is the one with F5 or F20. Should F20 appear on your oven, include it when you describe the fault.

The reset in three moves

  1. Cut power to the oven at the home circuit breaker.
  2. Keep it off for 30 seconds.
  3. Restore power and retest.

If the fault remains

Wolf’s wording is that service is then necessary and that owners should contact its service channel to arrange a repair. The entry lists no door, probe or water tank check, which means no further owner step exists.

See also

Common questions

What does F20 stand for? Wolf does not define it; it only sets F20 beside F5.

May I keep cooking if the reset cleared it? Wolf names no limit. A returning code is the point to stop and arrange service.

What should I look for? Since no cause is published, there is nothing to inspect.

Where we repair Wolf steam ovens

Our Wolf convection steam oven repair covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 886-0581 and tell us the code, whether F5 or F20 appeared, and the oven’s model number. The service page has more.

Source: Wolf answer page, Convection Steam Oven E123 and F5/F20

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair