Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Convection Steam Oven Error Codes E120, E121, E122, E124, E125, E131 and E132

Error code E120 / E121 / E122 …
Appliance Convection Steam Oven
Quick answer

A block of seven Wolf steam oven codes, E120 through E132, shows F5 and gets the same reset advice.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E120 / E121 / E122 ….

Plain language

What this code means

Wolf lists seven convection steam oven codes (E120, E121, E122, E124, E125, E131, E132) with the F5 message and only a breaker power-cycle as a remedy.

If a Wolf touch-control convection steam oven shows E120, E121, E122, E124, E125, E131 or E132, the same instructions apply to all of them. Wolf prints these codes on separate answer pages with identical text, and each page carries the F5 message. No cause appears in any of them.

At a glance

Code E120 / E121 / E122 …
What it means One of several steam oven codes that share the same F5 message and the same reset advice.
What you can check Write down the exact number on the display, then switch the oven's home circuit breaker off for 30 seconds, restore power and run the oven again.
When to call a technician A code that returns after the reset means service is necessary. Give the exact code, the F5 message and the result of the breaker reset when you book.

What Wolf does and does not say

The pages cover just two subjects: the reset, and what to do afterwards. Wolf does not explain how the numbers differ. Write down the exact number from the display; it is the detail to give when you book, together with the F5 message and the result of the breaker reset.

Steps for an owner

Switch the oven’s home circuit breaker off for 30 seconds, then restore power and run the oven again. A code that returns after this means service is necessary, and Wolf points owners to its own service contact.

Codes with the same message

  • E119: external firmware error that also shows F5
  • E123: the same F5, with F20 listed as an alternative

Same text for all seven

Wolf’s text is word-for-word the same for each number, with no cause and no part named. The advice does not change from one to the next. When you call, the code and the F5 message are what to quote.

Steam oven repair help across our metro areas

For a Wolf convection steam oven that keeps displaying one of these codes, we cover the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 886-0581 with the code, the model number and a note that the breaker reset did not hold. More detail is on the Wolf convection steam oven repair page.

Source: Wolf answer page, Convection Steam Oven E120 and F5

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair