U400 is Wolf over voltage code for induction ranges. Reset once, then call a professional.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: U400.
Plain language
What this code means
Wolf lists U400 as over voltage on induction ranges.
The listed cause
Only over voltage is given for U400 on the legacy induction range page, and Wolf prints it identically for its CE, CI and integrated module products. Whether the extra voltage comes from the house supply or from inside the range goes unmentioned, and nothing else about the code is added.
At a glance
Code
U400
What it means
The range reports an over voltage condition.
What you can check
Turn the breaker off to the unit, wait 30 seconds, turn it on and retest. Do not open the junction box, test terminals with a meter, or trip the breaker over and over.
When to call a technician
If U400 stays after one reset, call a technician. An electrician may be needed if the building supply is the cause. Mention whether other household appliances act oddly.
The one safe step
Breaker off to the unit, wait 30 seconds, breaker on, retest. When the range then runs without U400, the matter is closed. This power cycle is the only advice Wolf gives.
Do not try
Opening the junction box.
Testing terminals with a meter, unless qualified.
Tripping the breaker over and over; a supply that is truly too high makes that unsafe.
Voltage trouble is the classic job for professionals, and repeated attempts are not a safe habit.
Who finds the cause
Wolf’s last instruction is to contact service. An electrician corrects the problem if the building’s supply is to blame, and until then the range will continue to show U400.
Short answers
Do surges explain U400? Wolf names no source, only over voltage. An electrician or technician would have to trace where it comes from.
Can I reset the breaker safely? Yes; Wolf lists it, provided no wiring is touched.
Wolf induction range service covering the Miami, New York, Houston, Los Angeles and San Diego metro areas is reached at (844) 886-0581. Provide the model and note whether other household appliances act oddly.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.