Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Dual Fuel Range Code LOWER RELAY: Shift Register Failure

Error code LOWER RELAY
Appliance Dual Fuel Range
Quick answer

LOWER RELAY on a legacy Wolf dual fuel range: lower oven shift register feedback failed. Breaker reset, retest, then service.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: LOWER RELAY.

Plain language

What this code means

LOWER RELAY reports that the lower oven shift register feedback indicated a failure.

What Wolf says is wrong

Seeing LOWER RELAY means the shift register feedback tied to the lower oven reported a failure. Think of a relay as a switch run by electricity that powers an oven element. A shift register is an electronic part that distributes control signals to several outputs in turn, and the feedback is the control’s way of confirming the switching took place. This time the confirmation said it had not worked.

At a glance

Code LOWER RELAY
What it means LOWER RELAY reports that the lower oven shift register feedback indicated a failure.
What you can check Switch the range's breaker off for thirty seconds, switch it back on, then test the oven. Note which oven mode was in use and whether the message came at start-up or during a cycle.
When to call a technician If the message returns after the reset, a service visit is needed because no further owner step exists. If the upper oven works normally, tell the technician.

Owner action

Wolf’s list is short: breaker off, thirty seconds, breaker on, then test the oven. After that, Wolf says nothing more can be offered for owners, and no replacement part is mentioned.

Lower, not upper

The lower oven is the one named. If your range has two ovens and the upper one works as normal, mention that to service, because it helps place the fault.

What to record

Write down the date, which oven mode was in use, and if the message came at start-up or during a cycle. Wolf gives no cause, and a technician will find those facts more helpful than speculation.

Similar-sounding codes

Code Wolf’s description
0E Power relay sensed closed when it should be open
0221 Bake/right convection element DLB relay shorted, right or single oven

Each is its own condition in Wolf’s list, even though the names resemble LOWER RELAY.

Wolf dual fuel range repair in the metro areas we cover

From Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 886-0581 about a LOWER RELAY that survives the reset. Say whether the upper oven heats. More on the dual fuel range service page.

Source: Wolf answers, legacy dual fuel range

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair