Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Dual Fuel Range Error 0E: Power Relay and Element Circuit

Error code 0E
Appliance Dual Fuel Range
Quick answer

Error 0E lists three possible causes on the power relay side of a legacy Wolf dual fuel range.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 0E.

Plain language

What this code means

Wolf lists a shorted power relay, a failed element circuit and failed relay drive circuitry as causes.

Two spellings, one code

0E (zero) and OE (letter) are both in Wolf’s list for the legacy dual fuel range. The topic is the power switching of the oven.

At a glance

Code 0E
What it means A shorted power relay, a failed element circuit or failed relay drive circuitry may be behind it.
What you can check Switch the unit off at the breaker, then on again, and watch whether the error returns and the oven heats properly. A clear display alone is not enough of a pass.
When to call a technician If the error returns or the oven behaves oddly, service is needed. Since a relay could be stuck closed, keep the range off at the panel between uses until it is examined.

What Wolf lists as causes

  • A power relay that is shorted, meaning the control reads it as closed at a time it should be open.
  • A failure of the element circuit.
  • A failure of the relay drive circuitry.

The article does not put them in order of likelihood, and it gives owners no way to distinguish them. A technician’s meter does that.

How the check works

Wolf’s wording differs from most codes. Switch the unit off at the breaker, which resets the circuit, then switch it on again and watch. The question is whether the error returns and whether the unit operates properly, so a clear display alone is not the pass mark.

If OPP is what you see

The article cross-refers to another answer titled “OPP displayed on oven control knob”, which applies if that text is on your knob display.

Outcomes

After the reset Wolf’s guidance
No error, normal operation Continue as usual
Error returns or odd behavior No further troubleshooting; service is needed

Because a relay could be stuck closed, leaving the range off at the panel between uses is a sensible precaution until it has been examined.

Other relay and element codes

Wolf relay repair across our metro areas

For Miami, New York, Houston, Los Angeles and San Diego, call (844) 886-0581. Tell us whether the 0E reappeared and whether the oven heated as it should.

Source: Wolf Answers: Legacy Dual Fuel Range Error Code 0E

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair