A status report from the lower oven's shift register failed. Wolf lists no owner steps.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: LOWER RELAY.
Plain language
What this code means
Shift register feedback from the lower oven indicated a failure.
Reading the message
When a Wolf L Series double oven prints LOWER RELAY, the lower cavity’s shift register has returned feedback that indicated a failure. The fault therefore belongs to the lower oven’s control electronics, and the upper oven is not the one named.
At a glance
Code
LOWER RELAY
What it means
The lower oven's control electronics returned feedback that indicated a failure.
What you can check
There is no owner step for LOWER RELAY. Leave the lower oven off while the message shows, and switch the unit off at the breaker if the display acts oddly.
When to call a technician
Call for service as soon as LOWER RELAY appears, because the lower oven needs diagnosis and repair. Do not cycle the breaker repeatedly, since no reset applies here.
Vocabulary
Inside the oven, relays do the on/off switching of its functions under electrical control. One small chip, the shift register, feeds commands to a group of them and reports what happened. A bad report gets the lower oven flagged. Wolf does not identify the relay, the damaged part, or whether cooking is still possible.
Wolf’s position on owner action
There is none to take. Customer troubleshooting is not offered for this message, and Wolf says the product needs service for diagnosis and repair. Most Wolf messages come with a breaker reset; this one comes without.
Handling notes
Describe the message with the word “LOWER”, because it tells you which oven.
Leave the lower oven off while the message appears.
Turn the unit off at the breaker if the display acts oddly.
The upper oven goes unmentioned by Wolf. If either oven misbehaves, switch off and call instead of cycling the breaker repeatedly; Wolf documents no reset for this one.
Compare
RELAY STUCK deals with a power relay sensed as closed, and Wolf pairs it with a breaker reset. On the older E Series, 07 x 15 is a broil relay reading open.
Service for Wolf wall ovens in the Miami, New York, Houston, Los Angeles and San Diego areas
We handle Wolf oven calls across the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 886-0581 and give the model number, the word LOWER and what the display shows. Details are on the Wolf oven service page.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.