Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Legacy E Series Oven Code 07 x 15: Broil Relay Open

Error code 07 x 15
Appliance Wall Oven
Quick answer

Wolf lists 07 x 15 as an open broil relay on Legacy E Series ovens and offers no owner steps.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 07 x 15.

Plain language

What this code means

Wolf lists 07 x 15 as the broil relay open and gives no customer troubleshooting.

The control in a Wolf Legacy E Series oven has logged an open broil relay when 07 x 15 appears. Wolf’s answer library has just that, together with a statement that customer troubleshooting advice is not available for the code.

At a glance

Code 07 x 15
What it means The oven control detected an open broil relay, the switch that powers the top heating element.
What you can check Write down the exact code and whether the oven was baking, broiling or idle when it appeared, and see if baking still works normally. Leave the control panel and wiring alone.
When to call a technician There is no owner fix for this code, so book a service visit. Relay circuits carry full oven voltage, and a technician has to confirm whether the relay, wiring or board is at fault.

Function of the broil relay

Think of a relay as a switch that electricity operates. Whenever the oven wants the top element hot, the control board shuts the broil relay; to turn the element off, it opens the relay. An open relay simply is not passing power. Wolf does not explain whether the oven opened it at an unwanted time, or whether the relay, the wiring or the board driving it has gone wrong.

What is sensible to do

  • Jot down the exact code and the activity when it showed: baking, broiling or idle.
  • Check if the oven can still bake. No symptom is linked to the code by Wolf, but a technician benefits from the detail.
  • Do not take off the control panel or touch wiring; relay circuits carry household current at oven voltage.

A breaker off-and-on appears in some other Wolf relay entries. It is absent for 07 x 15, so no official step exists before a service appointment.

Codes close to 07 x 15

Code Note
07 x 14 Outer bake relay open, same series
07 x 13 Inner bake relay open
03 x 2 Broil element not detected by the control

Is it wear?

Nothing from Wolf connects the code with age, usage or a specific trigger, so wear is not a safe conclusion. What can be stated: an open broil relay was seen, and Wolf asks for a technician to confirm the cause. Meanwhile, bake mode may be used if it behaves normally, with an eye on the display.

Wolf oven repair in Miami, New York, Houston, Los Angeles and San Diego

When 07 x 15 is on your display in one of the Miami, New York, Houston, Los Angeles or San Diego metro areas, call (844) 886-0581 with the code, model and serial label. See Wolf oven repair for the service.

Source: Wolf Answers, 07 x 15: Broil Relay Open

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair