Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Wall Oven Error Code 0B31: Upper Cooling Fan Triac Shorted

Error code 0B31
Appliance Wall Oven
Quick answer

Wolf code 0B31 or 0B20: the upper oven's cooling fan switch is reported shorted.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 0B31.

Plain language

What this code means

Wolf reports the switch (triac) for the upper cooling fan as shorted.

0B31 (or 0B20) is Wolf’s “Upper cooling fan triac shorted.” The cooling fan’s switch is reported separately in the M Series, and this one is the upper cavity.

At a glance

Code 0B31
What it means Wolf reports the switch (triac) for the upper cooling fan as shorted.
What you can check Cut power at the household breaker, wait 30 seconds, switch it on and test the unit. Until it is sorted, skip long, hot cycles, as a general precaution.
When to call a technician If 0B31 is still showing, home troubleshooting is finished and service is the next step. Have the display text, when it appeared and what the reset did ready.

Reset and retest

The only owner step is the breaker. Cut power at the household breaker for the oven, wait out 30 seconds, then switch it on. Then test the unit. If the code is still there, troubleshooting at home is finished; Wolf gives no other advice to owners.

Staying careful with heat

  • Heat from the oven electronics and outer surfaces is carried off by the cooling fan.
  • Wolf reports nothing about how the fan behaves under 0B31.
  • Long, hot cycles are best skipped when the fan may be idle; that is a general precaution only.

Which oven?

Upper cavity on a double oven. A single oven is not addressed in the source, so the model documentation, or a question when you call, settles which label applies. The path is identical in both cases: reset, retest, service.

Notes before you call

Wolf gives one cause, the shorted triac, and no symptoms. Good notes are therefore the best preparation: what the display read, when it appeared, and what the reset did. A visit can then start from the cooling fan circuit.

Neighboring entries

  • 0B32 is the lower cavity cooling fan fault
  • 4910 reports the upper cooling fan stalling
  • 5220 reports high ambient temperature at the relay board

Wolf oven repair in Miami, New York, Houston, Los Angeles and San Diego

Service is available across the Miami, New York, Houston, Los Angeles and San Diego metro areas; the number is (844) 886-0581. Helpful details to have ready are the code, the time it appeared and the result of the reset. See the Wolf oven service page too.

Source: Wolf answers, M Series 0B31: Upper Cooling Fan Triac Shorted

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair