Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Wall Oven Error Code 07 x 6: What a Shorted Left Convect Fan Triac Means

Error code 07 x 6
Appliance Wall Oven
Quick answer

07 x 6 from Wolf means the left convect fan triac is shorted. Service is the only step Wolf recommends.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 07 x 6.

Plain language

What this code means

Wolf reports the left convect fan triac as shorted and offers service only.

What Wolf states

  • Fault: left convect fan triac shorted, on Legacy E Series ovens.
  • Customer troubleshooting: not available.
  • Next step: service is necessary.

Wolf supplies no further cause for 07 x 6.

At a glance

Code 07 x 6
What it means Wolf reports the left convect fan triac as shorted and offers service only.
What you can check No reset is given for this code, so leave the oven alone. Watch whether the left fan keeps running after the oven is switched off, and whether another code appears too.
When to call a technician Service must find the failing part. Do not pull the oven out or remove panels to reach the control board.

The triac and the fan

The solid-state switch that powers the fan motor is the triac. If it is shorted, it conducts when it ought to block, and the fan could be getting power the control did not request. What you will observe is not in Wolf’s text. One oven may run the fan constantly, another may seem fine until the code arrives.

Observations worth passing on

  • Does the left convection fan go on running after the oven is switched off?
  • Did 07 x 6 appear together with a different code?

Please avoid

  • Pulling the oven out or removing panels to reach the control board.
  • Using the breaker reset that Wolf gives for other codes, as it is not part of this entry.

Why no reset is offered

Wolf passes on a breaker reset for many of its codes, but not this one. Leave the oven alone, use another mode if it behaves normally, and let service determine the failing part.

Compare the fan entries

  • 07 x 19 is the same triac in the open state.
  • 07 x 7 is the right convect fan triac, shorted.

Fan switch repair for Wolf ovens, metro areas

In the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 886-0581 about 07 x 6. The oven’s model and serial label details speed up the conversation. Wolf oven repair visits are set up from there.

Source: Wolf Answers, 07 x 6: Left Convect Fan Triac Shorted

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair