Legacy E Series code 07 x 11 shows DLB2 shorted. Wolf's answer says to arrange service.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 07 x 11.
Plain language
What this code means
Wolf lists 07 x 11 as DLB2 shorted, with no customer troubleshooting available.
Code 07 x 11 is named “DLB2 Shorted” in the Legacy E Series answer from Wolf. The wording is short. Customer troubleshooting advice is not available, and service is necessary to expertly diagnose and repair the product.
At a glance
Code
07 x 11
What it means
The second double line break device, which cuts both supply lines, reads as shorted.
What you can check
Do not keep cycling the oven. Turn it off at the control, and use the breaker only if it appears to keep heating anyway.
When to call a technician
A service visit is needed, because this fault touches the safety circuit and there is no owner troubleshooting. Call with the code and the oven details.
The term DLB
DLB is short for double line break: a device that interrupts both lines of the supply to a load, not just a single line. DLB2 is the second such device in the oven (a general description). Wolf’s answer does not say which heating circuit it belongs to.
Two codes per device
Shorted, which is 07 x 11.
Open, which for DLB2 is 07 x 24; Wolf gives a breaker reset for that case.
Wolf gives the open case more guidance than the shorted case.
What owners should do
Because a shorted line-break device touches the safety circuit, do not keep cycling the oven. Turn it off at the control. If it appears to keep heating anyway, use the breaker, then call for service. Compare 07 x 12 for another shorted DLB fault.
Oven repair for 07 x 11 in our metro areas
Wolf ovens are serviced in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 886-0581 with the code and oven model, or read about Wolf oven repair first.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.