Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Fryer Module Error Code LO: Oil and Sediment

Error code LO
Appliance Integrated Module
Quick answer

Wolf fryer LO: oil level, sediment and RTD error, with the CLEAR reset and a two-minute wait.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: LO.

Plain language

What this code means

Wolf's fryer module shows LO for no oil in the pan, excessive sediment on the bottom of the pan, or an RTD error.

Owners get real checks with LO on the integrated fryer module. The causes Wolf gives are an empty pan, a build-up of sediment on the pan bottom, or an RTD error; the RTD is the temperature probe, which makes the last one a technician matter.

At a glance

Code LO
What it means Wolf's fryer module shows LO for no oil in the pan, excessive sediment on the bottom of the pan, or an RTD error.
What you can check Make sure the oil is at the correct level and add clean oil if short. If the oil is full of sediment, drain it only when fully cool and clean the basin. Press CLEAR, wait two minutes, then start.
When to call a technician If LO returns with correct oil and a clean basin, the temperature probe is the cause left, and it needs a technician. Say what you already checked.

Wolf’s steps

Check Action
Oil level Oil should sit at the correct level; clean oil goes in when it is short
Sediment Oil with heavy sediment means draining it and cleaning the basin, per the IF15 “Drain and Clean Basin” instructions
Lard For lard, see “Use Lard in a Fryer Module”
Reset The CLEAR key resets the control
Wait Leave the unit two minutes, then start it

Wolf also sends owners to the product use and care guide.

Safety with oil

Oil in a fryer keeps its dangerous heat long after switch-off. Drain it only when fully cool, and never move a pan of hot oil.

If LO comes back

With correct oil and a clean basin, the RTD error is the cause left on Wolf’s list. If its steps leave the problem unsolved, Wolf has nothing further to add and says to contact a Wolf-referred service company. F6 is the related entry where an RTD2 short circuit is the stated cause.

Fryer repair for metro-area homes

If LO persists with correct oil and a clean pan, the Miami, New York, Houston, Los Angeles and San Diego metro areas can call (844) 886-0581. Say what was already checked. See integrated module repair.

Source: Wolf answers, Integrated Modules (new 2015)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair