Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Wall Oven Error Code 1121: Upper Right Convection Relay Open

Error code 1121
Appliance Wall Oven
Quick answer

Wolf 1121 flags an open relay on the upper right convection element.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 1121.

Plain language

What this code means

Wolf reports an open relay on the upper right convection element.

One of the shortest M Series pages Wolf publishes belongs to 1121. Wolf lists the cause, the owner action and what to do if the code persists.

At a glance

Code 1121
What it means Wolf reports an open relay on the upper right convection element.
What you can check Switch the breaker off for 30 seconds, reset it and retest. If heating is normal afterward, watch for the code in convection modes and write down the mode in use.
When to call a technician If 1121 stays or returns, a service call is needed. Keep the cover plates on, because the circuit is on the oven's mains side.
Item Wolf’s entry
Cause Upper right convection element relay open
What an owner does Switch the breaker off for 30 seconds, reset, retest
Still there afterwards Contact Wolf service; there is no further troubleshooting advice

The part involved

In convection cooking an element and fan keep hot air moving around the food. The code is tied to the upper right element, and a relay is the switch that feeds that element. The control board shows 1121 once it finds that switch open. Whether the relay, its wiring or another part is the problem is not stated.

Practical advice

  • Reset one time. If heating is normal afterwards, watch for the code in convection modes in particular.
  • Write down the mode in use at the moment the number appears; service will ask.
  • Leave the cover plates on, because the circuit is on the oven’s mains side.

FAQ

Does the code blame the fan?
No, it names a relay for the element. Fan faults are listed under different numbers.

Can I carry on baking without convection?
Wolf does not address it. If ordinary bake works and 1121 does not return, it is your call, though the fault has been recorded.

Neighbors

  • 1122 is the lower right counterpart, also open
  • 0122 flags the lower right convection element relay as shorted

Wolf convection oven repair in Miami, New York, Houston, Los Angeles and San Diego

Metro-area service in Miami, New York, Houston, Los Angeles and San Diego is booked on (844) 886-0581. State that the upper right convection element relay is the one named and give the model number from the data label. Visit the Wolf oven service page for more.

Source: Wolf M Series wall oven fault code answer pages

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair