Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Wall Oven Codes E06, E11, E12, E33, E34, E51: Relay Board

Error code E06 / E11 / E12 / E33 …
Appliance Wall Oven
Quick answer

Wolf lists six SO24 codes with one cause, a faulty relay board, and one owner step, a 30-second breaker reset.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E06 / E11 / E12 / E33 ….

Plain language

What this code means

Wolf lists E06, E11, E12, E33, E34 and E51 on the 24-inch E Series (SO24) wall oven with the same cause: relay board faulty.

One cause, six numbers

E06, E11, E12, E33, E34 and E51 each have their own Wolf article for the 24-inch E Series wall oven (SO24). All six name the same cause, relay board faulty, with the same wording and the same advice. Gathering them here saves hunting for yours.

At a glance

Code E06 / E11 / E12 / E33 …
What it means The oven's relay board, which switches power to heating and other loads, is faulty.
What you can check Switch the oven off at its circuit breaker, count to 30, switch it back on and run the oven to see whether the code returns.
When to call a technician If it does return, there is no more troubleshooting advice and a service visit is needed. Replacing the board is not a do-it-yourself task.

Codes covered

Whichever of E06, E11, E12, E33, E34 or E51 is on your display, Wolf’s entry for it gives one and the same explanation. The articles do not tell the numbers apart or say why six exist.

Function of the relay board

Relays are switches operated electrically. In an oven they connect power to the heating and other loads on a command from the control board, and the relay board carries them. A “faulty” verdict from Wolf means the oven’s own diagnostics flagged it.

Reset, the only owner step

Switch the oven off at its circuit breaker in the house panel, count to 30, switch it back on, and run the oven to see whether the code returns. If it does, Wolf has no more troubleshooting advice for these codes and tells owners to contact its service channel. Board replacement is no do-it-yourself task.

Board-related codes elsewhere in the list

  • E36 / E37: a different board, the control board, listed as faulty
  • E54: supplementary board to relay board connection fault
  • E58: includes a faulty relay board among causes that also cover house wiring

Wolf relay board repair in the metro areas we serve

Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can call (844) 886-0581. Give the exact code displayed and say that the breaker reset left it in place. More at Wolf oven repair.

Source: Wolf answers: SO24 E Series E06; E11; E12; E33; E34; E51

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair