Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf CT Induction Cooktop E3 Code: Generator 2 Heatsink Too Hot

Error code E3 / E03
Appliance Induction Cooktop
Quick answer

Wolf CT cooktop E3 means the generator 2 heatsink is too hot. Let it cool, reset, retest.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E3 / E03.

Plain language

What this code means

E3 on a Wolf CT induction cooktop is a generator 2 heatsink temperature too high code.

Heatsink and generator

Wolf gives the cause of E3 on the CT Series induction cooktop as the heatsink of generator 2 running too hot. Heatsinks are finned metal parts that move heat off power electronics. Generator means the power stage itself, and the 2 says which stage. No cooking zone is linked to it.

At a glance

Code E3 / E03
What it means E3 on a Wolf CT induction cooktop is a generator 2 heatsink temperature too high code.
What you can check Wait until the cooktop has cooled, switch the breaker off for 30 seconds, then on, and retest. If the code clears and stays gone, leave it. Do not run the cooktop over and over to test.
When to call a technician If E3 repeats, arrange a service visit. Mention what had been cooking and for how long, if you can.
Order Action
First Wait until the unit has cooled
Second Breaker off 30 seconds, then on
Third Retest the cooktop

What the result tells you

Use of the cooktop can play a part in heat faults, yet no habits or conditions are given. Once E3 has cleared after cooling and stays gone, leave it. If it returns, the entry has nothing more and points to Wolf’s service channel. Resist running the cooktop over and over to test while it trips.

Other heat and generator codes

  • E4, the equivalent for generator 3 on the CT Series.
  • E1, which is about surrounding air.
  • E8, a separate generator 1 communication code.

Wolf CT cooktop service in Miami, New York, Houston, Los Angeles and San Diego

If E3 repeats, ring (844) 886-0581; mention what had been cooking and for how long if you can. The induction cooktop repair page gives an overview.

Source: Wolf answers, CT Series induction cooktop

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair