Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Convection Steam Oven Code E67: Kinked Hose and Scale

Error code E67
Appliance Convection Steam Oven
Quick answer

With F20, E67 lists boiler scale, a kinked silicone hose and a temperature sensing issue.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E67.

Plain language

What this code means

Boiler scaled up, silicone hose kinked, or a temperature sensing issue.

What Wolf lists

  • Boiler scaled up
  • Silicon hose kinked (Wolf’s spelling for silicone)
  • Temperature sensing issue

The answer page shows these under E67 together with F20.

At a glance

Code E67
What it means Boiler scaled up, silicone hose kinked, or a temperature sensing issue.
What you can check Shut the oven off at the house breaker, wait 30 seconds, restore power and run it. If the code remains, descale the boiler using the CSO procedure if that has not been done recently, then test again.
When to call a technician If E67 survives both the reset and the descale, the oven needs diagnosis and repair by a technician. A kinked hose is a physical fault, so tell them when you last descaled.

The odd one out

Of the three, the hose is the one Wolf describes as a kink. Wolf does not locate it, and scale removal has no effect on a kink, so a technician handles it.

Actions in sequence

First, shut the oven off at the house breaker, wait 30 seconds, restore power and run it. Second, descale using the CSO procedure if that has not been done recently. If neither resolves the code, the oven needs diagnosis and repair by service. There is no stated delay between the two actions, so test after each.

Why the causes call for different handling

Descaling answers scale, the breaker reset is a plain power cycle, and the hose is a physical fault. The temperature sensing issue is not detailed by Wolf. A code that outlasts both steps goes to service.

Also in this family

E66 is the entry with the thermal cutout; E69 shares the scale cause and a service-only conclusion.

Service in our metro areas

Wolf steam oven service covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Dial (844) 886-0581, quote E67 and F20, and say whether descaling was recent. The steam oven service page has further details.

Source: Wolf Answers, Convection Steam Oven Error Code E67

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair