Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Convection Steam Oven Error Code E26: Sensor Break or Blocked Duct

Error code E26
Appliance Convection Steam Oven
Quick answer

E26 on a Wolf steam oven is the open-circuit counterpart of E25 at the climate sensor.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E26.

Plain language

What this code means

E26 (F3) on the Wolf convection steam oven is listed with a break or loose contact in the climate sensor or wiring, a blocked exhaust duct and a blocked duct between the cooking space and sensor.

A Wolf convection steam oven that shows E26 and F3 is reporting a break or loose contact in the climate sensor or its wiring, or a duct that is blocked. Wolf gives these three causes:

At a glance

Code E26
What it means A break or loose contact in the climate sensor or its wiring, or a blocked exhaust duct or sensor duct; shown with F3.
What you can check Cycle the home breaker, 30 seconds off and then on, run the oven and see if E26 returns. If it does, keep the oven switched off rather than restarting it repeatedly.
When to call a technician Once the code is back after the reset, arrange a service visit. Say if E25 appeared first and whether the code came during a steam program or a dry one.
  • Break or loose contact in the climate sensor or wiring
  • Exhaust duct blocked
  • Duct between cooking space and sensor blocked

Nothing to rank

Wolf does not put the causes in order of likelihood. It does not tell an owner to clear a duct, and its steps do not mention the wiring.

The listed steps

  1. Cycle the home breaker: 30 seconds off, then on.
  2. Run the oven and see if E26 is back.

If it is back

Wolf names service as the next step. E25 and E26 share their text, and the legacy SO24 wall oven answer pages list the same causes. Rather than restart the oven repeatedly, keep it switched off.

Related codes

  • E25: the shorted version of this sensor fault
  • E29: seal and door causes, also tied to air in the cavity

Helpful details to give

When E25 appeared before E26 on the same oven, say so; the history matters as both codes involve one sensor and its ducts. Also note whether the code came during a steam program or a dry one.

Steam oven repair in our service metros

We repair Wolf convection steam ovens in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 886-0581 with E26 and F3, and tell us when it first appeared and whether the reset helped. Further information is on the Wolf steam oven repair page.

Source: Wolf answer page, Convection Steam Oven Error Code E26; Wolf answer page, SO24 E Series Wall Oven Error Code E26

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair