Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf CI Induction Cooktop Code 47: What a LIN Error Means

Error code 47
Appliance Induction Cooktop
Quick answer

Wolf CI cooktop code 47 is a LIN communication error. One clean retest may be all that is needed.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 47.

Plain language

What this code means

Code 47 on a Wolf CI induction cooktop is a LIN communication error.

Meaning

Seeing 47 on a CI induction cooktop means the control logged a LIN communication error. Think of LIN as a plain data line that lets one circuit board speak to another within the appliance; the error says the exchange faltered. Wolf supplies neither the boards concerned nor the cause of the interruption.

At a glance

Code 47
What it means Code 47 on a Wolf CI induction cooktop is a LIN communication error.
What you can check Switch off the cooktop's breaker for 30 seconds, turn it on, and test the cooktop. If it then cooks without further errors, nothing more needs doing.
When to call a technician If 47 keeps coming back, a technician has to diagnose and repair the cooktop. Do not lift the glass or unplug internal connectors, since a data line fault cannot be tested from outside.

Procedure

The CI answer for this code is unusually easy-going about the result.

  1. Kill the cooktop’s breaker at home for 30 seconds.
  2. Switch it on again.
  3. Retest. According to Wolf, a unit that runs without further errors needs no action.

By Wolf’s terms, a single 47 followed by normal cooking is no reason for a repair.

When the problem remains

If the steps do not settle things, service is necessary, per Wolf, to expertly diagnose and repair the product. From the outside a fault in the data line cannot be tested: keep the glass down and do not unplug internal connectors.

Related entries

  • Wolf lists the same LIN entry for the CE electric cooktop, the legacy induction range and the integrated modules.
  • E10, a CT Series communication code, is a different case: generator 3 is not talking to the control board.

Wolf cooktop repair in the Miami, New York, Houston, Los Angeles and San Diego areas

When 47 keeps returning, our line is (844) 886-0581. Note whether it shows at power-up or during cooking. Further information sits on the Wolf induction cooktop service page.

Source: Wolf answers, Integrated Modules (new 2015); Wolf answers, legacy induction range; Wolf answers, CE Series electric cooktop; Wolf answers, CI Series induction cooktop

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair