Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Electric Cooktop Code U400: Over Voltage

Error code U400
Appliance Electric Cooktop
Quick answer

Wolf lists U400 as over voltage. One breaker reset, then service if it comes back.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: U400.

Plain language

What this code means

U400 means the Wolf CE cooktop reads over voltage.

The code U400 stands for over voltage on a Wolf CE electric cooktop. The voltage the cooktop reads from its supply is higher than it expects.

At a glance

Code U400
What it means U400 means the Wolf CE cooktop reads over voltage.
What you can check Look at the breaker panel. If the cooktop's breaker is tripped, flip it back and note how it behaves. Otherwise switch it off, wait 30 seconds, switch it on and try the cooktop.
When to call a technician Call if U400 stays, or if the breaker will not stay on; leave it off and say so. Other appliances acting oddly at the same time suggest a supply issue worth reporting.

Before you reset

Look at the breaker panel. If the cooktop’s breaker is tripped, note how it behaves when you flip it back. A breaker that will not stay on should be left off, and you should say so when you call; that is a separate matter from a code that merely comes back. Swapping breakers and opening the junction box are not owner jobs.

Wolf’s reset

Switch the household breaker for the cooktop off, wait 30 seconds, switch it on, and try the cooktop again.

If U400 is still there

The manufacturer’s answer says there is nothing further to troubleshoot and points to service. Avoid cooking over and over with the code on screen. Other appliances that flicker or act strangely at the same time are worth reporting, because they suggest a supply issue rather than a fault in the cooktop.

Why a professional takes over

Wolf gives no cause and no voltage numbers for U400. Measuring supply voltage belongs to an electrician or a service technician.

Same code, other models

The same cause and reset are listed for U400 on several Wolf induction and integrated products.

  • E6: power supply error
  • EA: controller error

Wolf cooktop service across our metro areas

Wolf electric cooktop repair is available in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 886-0581 with the code U400 and your model number, and mention whether other appliances on the circuit reacted. See the electric cooktop service page too.

Source: Wolf CE Series electric cooktop answer page

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair