Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Electric Cooktop Code 39: Options Error

Error code 39
Appliance Electric Cooktop
Quick answer

Code 39 on a Wolf cooktop is a controller options error, reset at the breaker once and then service.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: 39.

Plain language

What this code means

Code 39 is a controller options error on Wolf cooktops.

Code 39 on Wolf cooktops is described as a controller options error, and the description goes no further. Wolf does not name the faulty option or say how it got that way, and it points to no component an owner could examine.

At a glance

Code 39
What it means Code 39 is a controller options error on Wolf cooktops.
What you can check Switch the cooktop's breaker off, give it 30 seconds, switch it on again and run the cooktop. One reset is enough; further tries only delay the call.
When to call a technician If 39 appears again, owners have no more troubleshooting to try and a technician should handle it. It is a control configuration matter, so nothing needs cleaning or inspecting.

Wolf’s published steps

For the CE electric cooktop, first switch the cooktop’s breaker off. Give it 30 seconds. Switch it on again, then run the cooktop to retest. If 39 appears again, Wolf’s answers say no more troubleshooting is available to owners and send you to service.

Same wording elsewhere

Wolf’s integrated modules and legacy induction range entries read the same, so you can treat 39 alike on all three product types.

A settings message is a job for a technician

This kind of message concerns control configuration, not a burner or a wire you can see. No outside part needs inspecting and no cleaning applies. After the one reset, more tries just delay the call.

Comparing three codes

  • 39: controller options error.
  • 30: data flash error.
  • EA: controller error.

All concern the internal control and all call for the same breaker reset.

Details to gather

Note the cooktop series and model label, the displayed number exactly, and that you left power off the whole thirty seconds. Wolf lists no other detail that service would ask you to collect, so there is nothing else to prepare. If the display shows anything besides 39, give that as well.

Cooktop repair for Wolf options errors: Miami, New York, Houston, Los Angeles, San Diego

Our coverage spans the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 886-0581 if 39 persists, and say the breaker reset is done. The service page lists the cooktop work.

Source: Wolf answers, CE electric cooktop; Wolf answers, integrated modules; Wolf answers, legacy induction range

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair