Wolf says Self Clean can cause A0C8, shown as Off Key Not Connected Per UIM.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: A0C8.
Plain language
What this code means
Wolf describes A0C8 as Off Key Not Connected Per UIM, which running a Self Clean can cause.
Summary
Message on the UIM: “Off Key Not Connected Per UIM”
Cause listed: running a Self Clean
Wolf’s step: cancel the Self Clean
No breaker reset is listed
Cancel, then cool
If a Self Clean is active, stop it from the control. This cycle gets the oven very hot and normally holds the door shut, so the range should cool down before anything is opened. The oven stays hot for some time, a general safety point.
At a glance
Code
A0C8
What it means
Wolf describes A0C8 as Off Key Not Connected Per UIM, which running a Self Clean can cause.
What you can check
If a Self Clean is active, cancel it from the control. Let the oven cool completely before opening anything, then read the display. No breaker reset applies here.
When to call a technician
If A0C8 is still there once the oven has cooled, it needs a service visit. Say whether a cleaning cycle was running; if none was, that rules out the only known trigger.
What the message says
The UIM does not detect the off key, the key that shuts functions off, as connected. Wolf does not explain how cleaning would affect that, and it does not describe the key as broken. Wolf only reports the two occurring together.
Next
Let the oven cool completely and read the display. If A0C8 is gone, the Self Clean was behind it. If it is still there, Wolf’s page moves on to service, and it lists no breaker reset.
If it stays
Wolf states that A0C8 requires service for diagnosis and repair, with Wolf service as the contact. When no Self Clean was ever started, say so: it rules out the only trigger Wolf mentions.
When A0C8 persists on a Wolf range in the Miami, New York, Houston, Los Angeles or San Diego metro areas, call (844) 886-0581 and say whether a cleaning cycle was running. Read more at Wolf induction range repair.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.