Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Induction Cooktop Code U400: Over Voltage

Error code U400
Appliance Induction Cooktop
Quick answer

U400 is an over voltage code on Wolf cooktops. One breaker reset, then service if it returns.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: U400.

Plain language

What this code means

U400 is listed by Wolf as an over voltage error.

The CI induction cooktop entry reads U400 as over voltage, and so do Wolf’s CE electric cooktop, integrated module and legacy induction range entries. The supply reaching the cooktop is judged higher than expected.

At a glance

Code U400
What it means Over voltage: the supply reaching the cooktop is judged higher than expected.
What you can check Move the cooktop's breaker to off, count 30 seconds, move it back to on and test the cooktop. If U400 does not reappear, it runs normally again.
When to call a technician If U400 returns, call for a service visit; anything beyond the reset is for a qualified technician or electrician. Mention flickering lights or misbehaving appliances at the same time.

What Wolf does not tell you

No voltage figure appears, causes are not listed, and house wiring and the utility go unmentioned; the reset is the only owner action. Whether the fault lies in the supply, the cooktop wiring or its electronics stays open.

One try

  1. Move the cooktop’s breaker to off.
  2. Count 30 seconds.
  3. Move it back to on and test the cooktop.

If U400 does not reappear, the cooktop runs normally again.

Stop here if it returns

A returning code means Wolf wants you to contact its service line, and there is no more troubleshooting for the owner. Because supply is the subject, anything beyond the reset is for a qualified technician or electrician. Flickering lights or misbehaving appliances at the same time should be mentioned.

  • Is another outlet or surge protection the answer? Neither appears in the entry. A doubtful house supply is something an electrician can measure.

Supply-related codes

Two other codes touch the electrical feed: E6, an electrical supply error, and 20, which on induction ranges combines a wrong connection with input voltage beyond 300 volts.

Wolf cooktop repair, five metro areas

In the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 886-0581 when U400 will not clear. Have the model number ready and describe any other electrical oddities; Wolf induction cooktop repair has background.

Source: Wolf CE Series electric cooktop error code answer pages; Wolf CI Series induction cooktop error code answer pages; Wolf Integrated Modules (new 2015) error code answer pages; Wolf Legacy Induction Range (IR) error code answer pages

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair