Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Module Cooktop Error Code U400: Over Voltage

Error code U400
Appliance Integrated Module
Quick answer

Wolf U400 reports over voltage. The reset Wolf lists and why further electrical checks go to a technician.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: U400.

Plain language

What this code means

Wolf lists U400 as over voltage on integrated modules.

U400 is over voltage: the electrical supply seen by the module is above what it should be. Wolf says nothing about the origin, so the origin is unstated.

At a glance

Code U400
What it means Over voltage: the electrical supply reaching the module is above what it should be.
What you can check Turn the unit's breaker off, count 30 seconds, then turn it on and retest. If the module works normally, that is the end of it. Do not keep cycling the breaker.
When to call a technician If U400 repeats, call for a service visit; voltage checks belong to an electrician or technician. Mention any odd behavior from lights or appliances on that circuit.

The one step

  • Breaker for the unit off.
  • Count 30 seconds, then breaker on.
  • Retest.

If the module then works as normal, that is the end of it.

When U400 repeats

Do not go on cycling the breaker. Wolf lists no further troubleshooting advice and refers owners to a Wolf-referred service company. Voltage checks on a cooktop circuit are for an electrician or technician, and mention any odd behavior from lights or appliances on that circuit.

Same wording elsewhere

Entry Meaning
Induction cooktops U400, over voltage
E6 Module power supply error
E26 Missing zero cross signal

Wolf module service in Miami, New York, Houston, LA and San Diego

Metro-area homes can reach (844) 886-0581 about a repeating U400. Mention the code and the reset. See integrated module repair.

Source: Wolf answers, Integrated Modules (new 2015); Wolf answers, CE Series electric cooktop; Wolf answers, CI Series induction cooktop; Wolf answers, legacy induction range

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair