Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf Convection Steam Oven Code E100: Relay Board Moisture

Error code E100
Appliance Convection Steam Oven
Quick answer

Wolf lists E100 on its convection steam oven as an operating system issue or relay board moisture. The reset is the only owner step.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E100.

Plain language

What this code means

E100 is listed by Wolf for an operating system issue or moisture on the relay board.

Quick summary of E100 on a Wolf convection steam oven: two possible causes, one owner reset, then service if the code persists.

At a glance

Code E100
What it means Either an operating system issue or moisture on the relay board, the board that switches power to the oven's loads.
What you can check Try the oven after switching its circuit breaker off, waiting 30 seconds and switching it on again the oven. Take note of what you tried at the breaker, since it helps the technician.
When to call a technician If the reset does not help, service is required to diagnose and repair the oven. Have the model number and the result of the breaker reset ready when you call.

Possible causes

  1. Operating system issue.
  2. Moisture on the relay board.

The relay board is a circuit board that switches power to the oven’s heating and other loads when the control board tells it to. E100 begins the three-digit run of codes on Wolf’s list and is the entry that mentions this board by name. Wolf does not say where the moisture comes from.

The reset Wolf describes

  1. Switch the oven’s circuit breaker off.
  2. Wait 30 seconds.
  3. Switch it on again and try the oven.

If the reset does not help

Wolf states that service is required to diagnose and repair the product and names Wolf’s Factory service as the contact.

Boards across nearby codes

Codes in the 100s mostly concern boards. Where E100 blames the relay board, a number of its neighbors blame the control board. Wolf also treats oven versions alike here, so a knob oven and a touch panel oven are not given separate repairs.

  • E112: relay board again, listed with an operating system issue
  • E105 to E110: moisture on the control board instead

Wolf steam oven service across our metro areas

For Wolf steam oven service in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 886-0581. Give the E100 code, what you tried at the breaker, and the model number. The convection steam oven service page has more.

Source: Wolf Answers, Convection Steam Oven

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair