Wolf lists the door lock as the only cause of E118 on its convection steam oven, which can show F29.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E118.
Plain language
What this code means
E118 is listed by Wolf with one cause, the door lock, and may display F29.
A Wolf convection steam oven showing E118 has the door lock named as its cause by Wolf, which adds that an F29 message may accompany it.
At a glance
Code
E118
What it means
The door lock has a fault; an F29 message may also appear.
What you can check
Shut off the household breaker serving the oven for half a minute, turn it back on, then operate the oven and watch for E118. Do not pry at the door or force it.
When to call a technician
If E118 returns after the reset, service is required to diagnose and repair the door lock. Note whether the door was latched and when the code appeared.
Undefined details
Wolf does not state whether the latch, the lock motor or the wiring is the problem.
Power reset
Shut off the household breaker serving the oven.
Keep it off for half a minute.
Turn it back on, then operate the oven and watch for E118.
This resets power only, and Wolf lists no other owner step before service. While the code is displayed, do not pry at the door or force it either way.
After a repeat
Wolf says service is then required to diagnose and repair the product, and sends owners to Wolf’s Factory service. No other owner check is listed.
Before you phone
Take note of the door state (closed and latched or not), the moment the code appeared (at power-up or during a cycle), and whether F29 showed. Wolf’s advice stays the same, yet the call goes faster.
E117: short in the lock motor circuit or E-hinge error
Service in the metro areas we cover
For Wolf steam oven service in the Miami, New York, Houston, Los Angeles and San Diego metro areas, dial (844) 886-0581 and have the code, the F29 message if present, and the failed breaker reset to report. The service page gives further detail.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Wolf convection steam oven repair for common convection steam oven problems. See safe checks, model and error-code help, and when professional service is…