PF on a legacy Wolf dual fuel range can mean a power failure or an oven too hot for the selected mode. Four reset steps are listed.
Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: PF.
Plain language
What this code means
PF reports a power failure, or an oven temperature that is too hot for the selected cooking mode.
Wolf’s explanation for PF on the oven knob of a legacy dual fuel range has two halves: the unit went through a power failure, or the oven is hotter than the chosen cooking mode permits. Nothing on the display separates the two, and the remedy is the same either way.
At a glance
Code
PF
What it means
The range had a power failure, or the oven is hotter than the selected cooking mode allows.
What you can check
Turn the oven selector into any cooking mode and back to OFF, open the door so the heat drops, then switch the breaker off for 30 seconds, restore it and retest.
When to call a technician
If PF keeps showing after cooling and the breaker reset, book a service visit. Mention any recent outage and how hot the oven had been.
Reset sequence
Begin by rotating the oven selector bezel into any cooking mode and then back to OFF. Next open the oven door so the heat in the cavity can drop. After that, switch off the breaker that feeds the range, wait 30 seconds and restore it. Finish by retesting the oven. Wolf places the bezel on the oven knob.
Heat safety
Open the door gradually and keep your face back from the opening.
Keep hands and cloths clear of the elements.
Did the lights flicker?
Where the kitchen lost power during cooking, the power-failure meaning fits, and the steps above restart the control. For the related case where surges or outages trigger an error, see Err 10.
Still showing PF
Wolf has no further owner steps beyond cooling and the breaker, and it directs you to service. If the cavity is truly overheating, check code 02, which gives the over-temperature figures for locked and unlocked doors.
Wolf oven power-loss codes: repair in our metro areas
Our team serves the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 886-0581 when PF returns, and mention any recent outage plus how hot the oven had been. See the dual fuel range service page too.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Wolf appliance?
Book a specialist visit for a clear estimate and approval before any repair.