Skip to content
Specialized Wolf repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Wolf CI Induction Cooktop E22 Code: Pad Error and Stuck Key

Error code E22
Appliance Induction Cooktop
Quick answer

Wolf CI cooktop E22: a pad or stuck key error. Take off anything on the pad and reset the breaker.

Error-code meanings can vary by Wolf product type, series, and model. Confirm the code against the documentation for your exact model before using troubleshooting information. Record your full model number before acting. Code shown: E22.

Plain language

What this code means

E22 on a Wolf CI induction cooktop is a pad error or stuck key error.

Two descriptions go with E22 in Wolf’s CI Series text: a pad error and a stuck key error. The touch-control area is the pad; viewed as a stuck key, the code says the controls consider a key pressed and held.

At a glance

Code E22
What it means E22 on a Wolf CI induction cooktop is a pad error or stuck key error.
What you can check Take any pan or utensil off the control pad, then turn the breaker off for 30 seconds and back on. Retest the cooktop. A control lock, if yours has one, may help prevent a repeat.
When to call a technician When the pad is bare and the reset is done but E22 stays, a technician must diagnose and repair the cooktop. Book a service visit rather than repeating the steps.

Quick checklist

One specific cause is stated by Wolf: leaving a pan or utensil on the control pad while the cooktop is unlocked can trigger the error.

  • Take off the pan, utensil or whatever else rests on the pad.
  • Breaker off for 30 seconds, then on.
  • Retest the cooktop.

Why unlocked matters

Mentioning an unlocked cooktop hints that the lock shields the pad from stray touches. With a control lock on your cooktop, switching it on while cleaning or putting items near the controls may prevent a repeat, though Wolf does not say so directly. Check your use and care guide.

Pad clear, error stays

If the controls are bare and the reset is done, Wolf tells you to proceed with service, which it describes as necessary for an expert to diagnose and repair the product.

Similar codes

  • Code 3, a CI Series code with a continuous tone, caused by liquid or cookware on the glass.
  • E13, the OFF key failure on the CT Series.

Induction cooktop service in our five metro areas

E22 outlasting a clear pad? Call (844) 886-0581 in the Miami, New York, Houston, Los Angeles and San Diego area. The service page for Wolf induction cooktops has detail.

Source: Wolf answers, CI Series induction cooktop

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Wolf appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Wolf appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair